Please note that the PICTURE UPLOAD function is not working. The iBoats Forum Moderators are working with the system administration folks at the parent company to get the issue resolved. This happened about a year ago and here we are again. In the meantime you can post photos as links to a picture hosting site of your choice. We are sorry about the inconvenience and will advise when the issue is resolved. Thank you for your patience.
I've hit the search function, but have not found quite what I'm looking for.<br /><br />Can anyone enlighten me on a proper bilge blower installation.<br /><br />Thanks
The install can be done any way that is easiest.the important things are that you route one hose to discharge(preferrably through a vent) and the other hose which draws air should be in the deepest part of your bilge area to evacuate any fumes or gasses. charlie
Well, I'm not sure about putting the hose in the deepest part of the bilge. If water builds up in there, well...<br /><br />Rather, put it next to the engine, but not at the bottom. You don't have to screw down the blower or anything, but it helps. Rule makes better blowers than Attwood.
