Bilge Drain Plug Question

[dvan1901]

My boat has a brass, screw in type, bilge plug. Well, I "lost" the plug last weekend (whole nother story). My question is, are these all a standard size? I went to Wally World last night after I noticed it was gone, but couldn't find the screw in type, only the rubber pressure fit kind (I have a stern drive so I can't get to the plug from the inside). Thanks!

 

[tashasdaddy]

Re: Bilge Drain Plug Question

should be standard pipe thread, 1/2 or 3/4. get a brass one at home depot , lowes, hardware store, buy 2 put one in glove box.

 

[dvan1901]

Re: Bilge Drain Plug Question

should be standard pipe thread, 1/2 or 3/4. get a brass one at home depot , lowes, hardware store, buy 2 put one in glove box.

Yeah, I told myself yesterday after I discovered this, "when you get one, get two you idiot!"