Bravo 1 gimbal housing

[roy c]

The studs that are on the gimbal housing can they be replaced ? do not want to put gimbal
back with same studs thanks roy

 

[southkogs]

Assuming it's a Bravo 1, you'll do better over here in the Mercruiser forum.

 

[Bondo]

The studs that are on the gimbal housing can they be replaced ?

Ayuh,.... It's an aluminum housin', with steel studs, so Ya, sure,....

It might take some heat to loosen the old ones though,....

 

[alldodge]

Can they be replaced, yes

How hard it will be to do it, as Bondo said it will take heat and be difficult. See item 2 and 3. Could also need to know what the drive serial number is.
http://www.mercruiserparts.com/bam/subassembly/30967/1943/160