bravo 3

[VACAVILLE]

I am in the process of replacing my outdrive. I now have a bravo1 and would like to replace it with a barvo 3. Should the 3 bolt right up or what would I nead to change to do this swap bravo1 to a bravo 3. the engin is a 7.4 454 merc.

 

[Walt T]

Re: bravo 3

There are two ways to do this.<br />You can either buy just the lower portion (gear housing assembly) or you can purchase a complete Bravo III. You will also need a set of props. The gear housing assembly can run you $3200.00 new. A set of new stainless props about $1200.00. <br />It is a bolt on procedure.<br /><br />I would buy a complete B III for the warranty. Typically the drives are around $4,700.00 new.<br />Remans would be around $4,000 for a complete unit and $2,600.00 for a lower. <br />There is a dramatic increase in performance.<br /><br />i-Boats may sell them cheaper. <br />Feel free to e mail me.

 

[outboardguy]

Re: bravo 3

Should bolt right up, just be sure you have the right ratio.