Calls for UL77V Can I use QL77JC4?

[sparkroost]

I really don't want to use a surface gap plug. 1973 115hp 115393M Model #

 

[Dhadley]

Re: Calls for UL77V Can I use QL77JC4?

The 73's were fairly close and I believe you said you decked the block. May have been someone else. If so you will just have to try them and see if they hit. As far as the heat range goes they are fine on a stock 1973 motor running 87 octane.<br /><br />Good luck!

 

[sparkroost]

Re: Calls for UL77V Can I use QL77JC4?

Ty Dhadley. I will check the clearance. I am soooooo close!

 

[sparkroost]

Re: Calls for UL77V Can I use QL77JC4?

Was the reason for the surface gap plugs for clearance reasons?<br /><br />After you posted that I went and looked.. piston sure comes close to the top! But they are not hitting the plugs.. Maybe I should use the surface gap plugS?

 

[Dhadley]

Re: Calls for UL77V Can I use QL77JC4?

Dont forget to allow for rod stretch.<br /><br />Good luck!

 

[Joe Reeves]

Re: Calls for UL77V Can I use QL77JC4?

SparkRoost..... Use the Champion QL77JC4 plugs with great ease of mind, and set the gap to .040 . It is a alternate plug recommended by OMC for that engine, to be set at that gap setting.<br /><br />The UL77V plugs work in many engines but unfortunately, regardless of the "77" rating, they have no real heat range and are quite prone to fouling.

 

[sparkroost]

Re: Calls for UL77V Can I use QL77JC4?

Will do!.. I just fired her up. Sounds yummie! she doesn't seem to want to go anywhere though. Maybe it's cause it still on the stand :-\, I am gonna slap her on the boat this weekend.<br /><br />I do appreciate all your help I have gotten with this motor. When I am done I will post pics with audio! EXCITMENT, ANTICIPATION!!

 

[CHILL OUT]

Re: Calls for UL77V Can I use QL77JC4? HELLLLP!!!! PLEASE

Re: Calls for UL77V Can I use QL77JC4? HELLLLP!!!! PLEASE

I HAVE AN EVINRUDE 50HP OUTBOARD ITS AN OLD ONE NOT SURE OF THR YEAR MAYBE 80,S????????????? I NEED 2 SPARK PLUGS CAN ANYONE HELP ME CHOOSE WHICH ONES I NEED THE ONES IN IT ARE BUHXW-1 BUT ON THE ENGINE COVER IT SAYS CHAMPION UL-77V IS THERE AN EQUIVALENT IF SO PLEASE TELL ME WHAT THE NO IS AND THE BEST PLACE TO GET THEM. THANK YOU.

 

[tashasdaddy]

Re: Calls for UL77V Can I use QL77JC4? HELLLLP!!!! PLEASE

Re: Calls for UL77V Can I use QL77JC4? HELLLLP!!!! PLEASE

CHILL OUT start your own thread, loose the all caps, and use punctuation so we can read it. also read this first. http://forums.iboats.com/showthread.php?t=250879

 

[tashasdaddy]

Re: Calls for UL77V Can I use QL77JC4? HELLLLP!!!! PLEASE

Re: Calls for UL77V Can I use QL77JC4? HELLLLP!!!! PLEASE

old post closed.