Can you identify this washer I found in my bilge?

robi7363

Recruit
Joined
Jul 6, 2012
Messages
3
I found this washer under my engine today while cleaning the bilge. OD=2" ID=1/2" thickness=1/8" Can anyone tell me what it is? Engine is 5.0 GXI and SX-A drive. Thanks very much.

464186AD-C71F-4900-B228-98B1DA8DA493.JPG
 

Fun Times

Moderator
Staff member
Joined
May 16, 2009
Messages
9,215
What year and color is your engine block and engine accessories painted from Volvo, Red? If yes, Is there anything painted Black as black "appears" to be on the outer edge side of the washer...Just looking for further clues to maybe try and help.
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
50,969
could be a fender washer from bolting in an engine mount if it is thru-bolt vs lag bolt.

however the washer looks too fresh to have lived in the bilge for a while.
 

robi7363

Recruit
Joined
Jul 6, 2012
Messages
3
What year and color is your engine block and engine accessories painted from Volvo, Red? If yes, Is there anything painted Black as black "appears" to be on the outer edge side of the washer...Just looking for further clues to maybe try and help.
2009 Engine is red, transom bracket is black. Repowered three years ago.
 

robi7363

Recruit
Joined
Jul 6, 2012
Messages
3
Looks like an engine mount washer.
Engine mounts seem correct now as they are, so I'm going to assume the mechanic dropped a washer during the repower and just used another. I was more concerned that it might be from the transom which is much harder for me to view with my boat.
 
Top