Cannot find the right propeller 225 OceanRunner

[cobbcfi]

My 1996 Johnson 225 needs a new prop but everything I am getting is to short in depth for the prop shaft.. The spline washer is 1/2" from the prop and the propeller si out of the exhaust hole.. Got the 14.5 by 21 pitch but the 3 time now its to short..
Anyone have a link for the correct prop?

 

[Faztbullet]

The new models use a different prop washer as shaft size is different ..Make sure it fits all the way down on taper

 

[dingbat]

What props are you looking at?

I’ve had no issues finding props for my 1997.
Don’t remember if I had to change thrust washers or not.

Used Merc Flo-torque hub in a 15x15 Merc Enertia. Hub looked long until you torqued the nut down on the shaft to seat the hub in prop

 

[dingbat]

What props are you looking at?

I’ve had no issues finding props for my 1997.
Don’t remember if I had to change thrust washers or not.

Used Merc Flo-torque hub on a 15x15 Merc Enteria. Hub looked long until you torqued the nut down on the shaft to seat the hub in prop