Hi fella's, I posted this under a different subject as I was getting away from my last thread on identifying this 140 I have. While I have such a welth or info here, I have a 1977 140hp motor, I had the carbs rebuilt because the floats were sticking, when I put them back on it seems to be running a little rich, starts real well, but short of loads up a little, then when I shut it off I get a little fuel leak out of the carbs. Is there an adjustment I can do, I was told that the carbs would have to come back off and reset the floats? Numbers on welch plug reads: 140743S J0005297.
