Casting Deck

springbok

Petty Officer 3rd Class
Joined
Jun 15, 2003
Messages
85
I have a 14ft aluminum boat (3 seats open concept) and I want to install a casting deck at the bow. Any suggestions? What to use etc...<br />Thanks
 

roscoe

Supreme Mariner
Joined
Oct 30, 2002
Messages
21,763
Re: Casting Deck

Click on over to the project boats page and you will have lots to read. But in general, plywood and Rhino liner.
 

dakotashooter2

Petty Officer 2nd Class
Joined
Jun 10, 2003
Messages
125
Re: Casting Deck

Nice job Bassin large. I've done two boats one with wood framing the other using 1" and 1 1/2" angle iron framing. The one with angle iron framing actually turned out to be lighter. I used mostly steel from old bed frames. IT IS surface hardened and resists bending a little more. Aluminum angle is even better if and when you can get it especially if it is free.
 
Top