Chrysler 130 HP 1307HB replacement prop?

[YukonDelta]

I have a Chrysler 130 HP outboard model 1307HB. I’m trying to figure out where to find a prop that will fit, there’s really not a lot of info about 130 because it was only made one year (1972-73) I believe.

I have it on a 25’ 1976 Yukon delta houseboat and am only getting to around 2k rpm, So I’m trying to find the correct pitch prop to move into the higher rpm at WOT.

I keep reading that Michigan wheel makes Chrysler props, but can’t seem to find anything that states it fits a 130.

I’ve done a ton of work to it, and it was running all summer. However I recently rebuilt the carbs because it had a leak, and now it’s dying out when I give it throttle. Im sure I’ll sort that out, but curious if anyone has ideas.

Thanks.

 

[jerryjerry05]

Any Chrysler Force up to 1994 should fit your motor.
What pitch is on the motor now?

This is a guess: 25ft. 130hp needs a 11p or 13p prop??
Finding an 11 might be tough?
There's a bunch of 13's on Ebay

 

[The Force power]

https://www.generalpropeller.com/pdf/QS_Prop_Guide.pdf