chrysler problems

[columbomoe]

i have a 125 chrysler motor that won't start and has all new parts. i am not really familiar with this because i just bought the boat off a friend for a real good price that could not be passed up. does anyone have any ideas . it also has a hydraulic pump that is shot and don't have any ideas where to get a replacement again does anyone know. am an avid fisherman and have yet to be on these beautiful waters of n.c. and want to bad thank you for your input

 

[oldboat1]

Re: chrysler problems

Maurice --<br /><br />some very good sources on this board, but they will need much more in the way of specifics. ("Does't start" is a bit too broad.)<br /><br />If you are new to boats, get the fellow who sold you the boat to go through the starting and operating procedure with you. That might be a good place to begin.<br /><br /> Curt

 

[Terry H]

Re: chrysler problems

Maurice...You have to choke the carbs to start...most common way to choke a o/b is to push the ignition key in while cranking. Be sure you have pumped the fuel line primer bulb till it is firm. Try this in a tank or on muffs, if no start check back with more specifics. Make sure the battery is fully charged...just a Thought

 

[columbomoe]

Re: chrysler problems

thank you much gentlemen for your replys but the trouble is not in the choke but something other than that