crysler1979 700 skier outboard/electrical parts

[licketdsplit756]

there is a unit on this motor witch is belt driven from the fly wheel. at the bottom of this unit there is a distrubtor cap i cant find this part or any other parts like the belt itself needs replaced. is there a site with a motor breakdown of these units so i can identify what they are>

 

[Force 120]

Re: crysler1979 700 skier outboard/electrical parts

The whole assembly unit is distributor used in Magnapower ignition system. The cap underneath with 3 wires to spark plug and one to coil is the distributor cap.
I don't think you can find it new since these parts no longer available but you can find a used one at junk yard or from old Chrysler motor. I have a couple spare for my engine.

 

[chitownborn]

Re: crysler1979 700 skier outboard/electrical parts

try www.crowleymarine.com they have some distrubutor parts, including the belt you need. on the drop down select force and that will take you to chrysler good luck don

 

[licketdsplit756]

Re: crysler1979 700 skier outboard/electrical parts

ty for the info..that is the belt i need from crowleys marine. alot of the parts are no longer available..but ty for responding... i have twin engines...bad enough trying to keep one running. but 2 of them gets a little exspensive. part of owning a boat i guess. ty again

 

[bkilpat74]

Re: crysler1979 700 skier outboard/electrical parts

What is the proper spark plug gap for this motor?

 

[Frank Acampora]

Re: crysler1979 700 skier outboard/electrical parts

No gap! Proper plug is UL 18 V or L 20 V surface gap plug.