Deck Plates to fix floor rot in my 16' aluminum starcraft

[febod]

I have 2 soft spots on my otherwise good looking floor.

Its a 94 Starcraft aluminum boat. The floor is screwed in there pretty tight from the factory.

I was thinking that I could cut a hole near the soft spot, fix the problem with a piece of pressure treated deck board, and install a deck plate in the hole I just cut

Thoughts?

 

[salty87]

Re: Deck Plates to fix floor rot in my 16' aluminum starcraft

there's really no way to tell until you take a look. if there are soft spots, there are spots that have started to rot but aren't soft, yet.

your plan might work. you also might find more than you were hoping for.

good luck...check out the restoration section. lots of experience over there.