Deck Question

Cast-A-Way

Petty Officer 2nd Class
Joined
May 9, 2008
Messages
138
Would it be ok if I installed my new deck in a 3 smaller sections or should I try to put it down in 2 larger sections

would it have any structural difference once it's all glassed in ?

and last question
Has anyone use rustoleum's epoxy shield garage floor covering on deck's ?


Thank you

Getting close to the end of the tunnel ( woohooo ):D:D
 

tashasdaddy

Honorary Moderator Emeritus
Joined
Nov 11, 2005
Messages
51,019
Re: Deck Question

i haven't use the garage stuff. but have used oil base regular rustoleum, with a little sand in it, for non slip.
as long as your joints are supported, 3 should be no problem.

i have gone to using the tongue and groove 3/4 inch Sturdi Floor from home depot. if you cut it right, you can use the tongue and groove at the joints, which makes joining really easy. it is what the use in housed under a carpeted floor, so it does not buckle, or have a hump in the floor. once seal will last almost for ever.
 

Cast-A-Way

Petty Officer 2nd Class
Joined
May 9, 2008
Messages
138
Re: Deck Question

Thanks TD as Always you have been very Helpful !!
 
Top