I previously posted a thread because it appeared my quick start on my 1996 Evinrude 130 was not shutting off. I was just out and noticed my lanyard clip had come off the ignition, yet the motor was still running even in gear. Before I started it again I installed the lanyard clip to the ignition and now the quick start feature is working as normal.
Two things:
First I thought the motor was not supposed to run without the dead man switch installed on the ignition??
Second, what could be up with the wiring to hold the idle at 1100 until the lanyard switch was installed, then it idles down to where it should?
Please let me know your thoughts.
Two things:
First I thought the motor was not supposed to run without the dead man switch installed on the ignition??
Second, what could be up with the wiring to hold the idle at 1100 until the lanyard switch was installed, then it idles down to where it should?
Please let me know your thoughts.