Evenrude Trolling Mototr ID

[fondren01]

How can I tell if my trolling motor is 12 or 24 volt?

 

[rickdb1boat]

Re: Evenrude Trolling Mototr ID

Maybe, if we knew what model motor you had..

 

[fondren01]

Re: Evenrude Trolling Mototr ID

Best I can tell you is its approximately a 1986 Evenrude Trolling Motor. I do not even know how to ID it.

 

[rickdb1boat]

Re: Evenrude Trolling Mototr ID

Does it have 2 or 3 wires coming from the unit to the plug? If 3, Black would be ground, red 12 volts and orange 24 volts. If 2 wires, it's 12 volt.

 

[fondren01]

Re: Evenrude Trolling Mototr ID

Rick,<br /><br />Thanks a lot for the info. Tomorrow I will uncover the boat, look and let you know what I find.<br /><br />Randy

 

[OBJ]

Re: Evenrude Trolling Mototr ID

Look on the footcontrol fondren...that's where the model number is. Post that and we can tell you what ya' got.

 

[fondren01]

Re: Evenrude Trolling Mototr ID

Thanks for the info OBJ.<br /><br />MODEL is BF2TK<br />12V DC<br /><br />I appreciate all of the help from you guys.<br /><br />Randy

 

[OBJ]

Re: Evenrude Trolling Mototr ID

Yep...ya' got it Randy....these were made 'tween 90' and 93'. 36" shaft.

 

[EvilLord]

Re: Evenrude Trolling Mototr ID

Greeting all,<br /><br />along the lines of this post... i have inherited a 88' stratos 201 pro. The scout trolling motor had a DPDT switch that says RUN and CHARGE then a center position of something, maybe OFF, that fed a three prong socket that the motor plugged into. There are two sets of red and black wires coming from two batteries in the back. Can anyone tell me how this thing is supposed to be wired? Thanks, Kevin