Re: ever get lucky?
Ohh and i used a circular saw and a angle grinder for the edges to get my "deck" out. JB is going to tell you that boats dont have floors so be ready. I adjusted the circular saw so that it was only cutting as deep as the thickness of my deck. Ya got to be careful around the edges and thats why i used the angle grinder for that so i could see what i was doing. I have heard of people leaving the edges there and glassing the new deck to the edges that are still there from the old deck. That should work as long as there is no rot on the edges that you leave from the last deck. Whatever you do, dont just put a new deck on top of your old deck. It will rot both pieces faster than before. Good luck and there is a lot of different ways to cut it out so im sure that someone else will chime in here soon with other ideas.
