marshmanjr
Recruit
- Joined
- Jul 2, 2010
- Messages
- 3
I have bought a boat with a non running evinrude 15 horse motor on it. I have bought a Evinrude repair manual for it and trouble shot the ignition end of the motor. Everything tested out good except for the peak voltages, but everything ohmed out good. Couldn't do the peak voltage on them because the meter I have doesn't do that. Going to take carb off tomorrow and clean it real good but other than that I will have no idea. Sprayed some starting fluid in the intake to see if it would start up and I did not (and I know starting fluid isn't good for the motor).