Evinrude 35 hp Electric start

[sportcraft17]

Hi guys, on a Evinrude 35 hp Electric start, Motor was with steering system and remote control, I did convert to a tiller outboard but I?m trying to install a omc Push to choke key switch on lower pan, Do you guys know witch wire( color) on the harness( above picture) is to trigger the solenoid? Witch cable is to shut the motor off and electric choke? I will really appreciated any help that I can get


Thank you

 

[F_R]

Re: Evinrude 35 hp Electric start

You don't say what year, but probably red/yellow is start, purple/white is choke, and black/yellow is stop.

 

[sportcraft17]

Re: Evinrude 35 hp Electric start

Hi there, Thanks for quick response, I don't know the year, serial number is: E0002798 Model; 35853R

Thank you

 

[F_R]

Re: Evinrude 35 hp Electric start

That's a 1978. The colors I gave came from a 1979 diagram, might be similar.

 

[sportcraft17]

Re: Evinrude 35 hp Electric start

Hi, here are the colors that I have on the harness all solid colors: Red, Yellow, Purple, Black, and Black,

thanks

 

[F_R]

Re: Evinrude 35 hp Electric start

You lost me. Somebody else may have the diagram for that year.

 

[HighTrim]

Re: Evinrude 35 hp Electric start

To trigger the solenoid or choke would be the violet with white stripe as FR said, maybe yours has been rewired?? Trace the purple wire back, does it go to engine primer solenoid coil? If so that is it. As far as the kill, it should be black yellow as stated. Trace both black wires back. 1 will go to the engine chassis or battery negative. The other should go to engine ignition kill circuit. That will be the one that you want.