Evinrude Tracker/fuel related stalling

[Reel Appeal]

Hi folks,<br /><br />I'm working on a mid to late 80's 9.9 Evinrude.I have a problem with the fuel delivery.This I'am sure of.The motor will run fine after priming the bulb for about 2 mins.Then it will rev slighty and stall out(outa gas).The primer bulb is soft(not collapsed)when this happens and the motor will keep running fine if I re-prime it.<br />Knowing the fuel pump has a filter screen on it(clean),would it be a good bet to assume a fuel pump problem or a carb problem?<br />I have check the tank pickup and used another tank w/a new fuel line,same problem.Thanks for reading my post.

 

[marinemech]

Re: Evinrude Tracker/fuel related stalling

replace fuel pump problem should go away your not using a fuel tank that mixes gas and oil are you

 

[Reel Appeal]

Re: Evinrude Tracker/fuel related stalling

No,just the standard 6 gal.plastic tank(pre-mix).Thanks for the response.