ez loader trailer

[DHpacker]

Does anyone know how to put a new coupler in this trailer, or maybe refer me to a how to video? Is it hard to do? I also bought the master cylinder. A guy at the trailer place bent my coupler with a skid loader, and now I have to replace. Please someone help! Thanks in advance

 

[donaldm]

Re: ez loader trailer

need photos to better understand. is it welded on? if so get an angle grinder with a thin 1/8" thick grinding wheel and cut the welds off then reweld the new one on.

 

[DHpacker]

Re: ez loader trailer

I have not took pics yet, but it is a break-away swing hitch on a ez loader 2004 trailer. The coupler that slides into it from the front, or the coupler that hooks to the ball hitch is bent. Is it as simple as taking the two bolts out the side of it that have the c-clamps and remove the bent coupler? Does the brake fluid holder (master cylinder) come out with it when you remove the coupler? Thanks so much. I won't be able to check back here till lunch time.

 

[jeeperman]

Re: ez loader trailer

uh so why not have the guy that bent it up replace it?

 

[nash1970]

Re: ez loader trailer

Need pictures