Finding Proper Jet and Prop Sizes

[TrenchFisherman]

Finding Proper Jet and Prop Sizes

I have a 200hp Evinrude crossflow made in 1979. I need to know what size jets to put in it since it was bored .30 over on all 6 cylinders. I don't even know what the stock sizes are because I just got the motor without the original carbs. Also I saw a post a few days back on selecting the proper prop size...if somebody knows the site please let me know. Thanks<br /><br />PS- does anyone know if a 150hp and 200hp have the same electrical units? Thanks again

 

[Terry H]

Re: Finding Proper Jet and Prop Sizes

Re: Finding Proper Jet and Prop Sizes

Shaun...I don't know the jet size, but the ignition and charging system should be the same...I believe there may be some minor ignition timing diferences tho...if in doubt set the timing as per the smaller motor. Good luck..just a Thought

 

[TrenchFisherman]

Re: Finding Proper Jet and Prop Sizes

Re: Finding Proper Jet and Prop Sizes

thanks a lot!!!