GOOD NEWS. . . . The PICTURE UPLOAD FUNCTION IS WORKING !!! The tech folks at the parent company have been able to remedy the issue. You can upload pictures once again. Thank you for your patience.
I have a Volvo penta AQ130C pushrod motor, the book says fuel pressure should be 3.2PSI and steady between idle and 1000rpm, I show 4.5 PSI and steady. Is this a problem, could it be why I have problems reaching 5000rpm?
4.5 isn't bad.. <br />Over 6psi is Too Much....<br />3.2 at anything over idle is low....<br />Lack of rpms is more likely to be Lack of fuel, Not Too Much....
