fuse on trim solenoids keep blowing

dcboone5244

Seaman Apprentice
Joined
May 25, 2004
Messages
32
Help. Virgin boat owner here. I have a 1984 120 hp mercruiser. My problem is when I go to move the lower unit up or down, the fuse (30amp ) keeps blowing. I had the motor tested that works good, I replaced the both the solenoids and I checked bad wiring. I dont know if the previous owner maybe wired it wrong and therefore I wired it wrong. Does anyone have any idea what to do and maybe a wiring diagram?
 

Ben Konopacky

Petty Officer 1st Class
Joined
Apr 5, 2004
Messages
296
Re: fuse on trim solenoids keep blowing

hi plumber, not knowing how it is wired,right or wrong,I would start out by getting a manual and start on the wiring circut looking for a short with a meter since the main components were checked out and found to be good...
 
Top