GREASE FITTING 1990 EVINRUDE

[bcook204]

Hi All, I have a 1990 evinrude 150 hp v6. Could someone tell me where all the grease fittings are? I found 2 for the tilt tube. I also see 2 areas that should be greased on the left right pivots when I turn the steering wheel. One is upper and one is lower. I found the fitting for the lower but cannot for the upper. Does this make sense. Sorry don't know the technical words for what I am trying to describe.

 

[robert graham]

May have to tilt motor up to find/see a grease zerk in that area....

 

[Crosbyman]

parts listing mentions 3 zertz .... maybe there are only 3

 

[bcook204]

I found the zerk fitting when I tilted the motor up. It greases the bottom pivot. I did remove the cow and found a zerk fitting on the bottom starboard side of the engine. Could this be it ? It is closest to the upper pivot. Do all zerk fittings get grease or could it be something else

 

[Crosbyman]

that is what they are for.... grease it till the old grease ooozes out whilet wisting the engine and pivot points

 

[bcook204]

Thanks I'll grease it up! !