help me ,to much smoke

[jpm-01]

hello people .<br /><br />i have a 70hp evinrude (from 1994 i think)<br />has been running well but now wen i start the engine and even after all along the day the engine puts a LOT of smoke not from the propeller itself but from the 2 holes near the power head and above the water .<br /><br />hellllpppp meeeeee.<br /><br />thanks you all.

 

[FlyBoyMark]

Re: help me ,to much smoke

Smoke or steam? Check the oil injection lately? Linkages attached and working ok?

 

[Leeobiwan]

Re: help me ,to much smoke

The only advice i have is to premix your gas/oil outside of the boat to ensure proper mixture. might be burning too much oil? good luck

 

[jpm-01]

Re: help me ,to much smoke

too much smoke:<br /><br />my 70hp evinrude is an autolub and i only use tcw3 shell oil, i think it is a good oil and is recomended, but i also think my problem is the mix done by the engine that burns too much oil.<br /><br />can anyone help me .<br /><br />thanks

 

[FlyBoyMark]

Re: help me ,to much smoke

You need to get a manual for the motor if you want to adjust this yourself........

 

[Trent]

Re: help me ,to much smoke

To much oil smoke from the VRO system is due to an airleak in the fuel side of the system. Check all connections including o-rings in the fuel tank connections and engine connections.