help merc 65hp 1973 stalls on full power.

paramedic416

Recruit
Joined
Aug 22, 2003
Messages
2
My Engine, 65 hp merc, stalls when givin full power from nutral position. The stalls when given power in reverse to fast. Will run fine if given power slowly. I can't find the ajustment screw for idle. Is that the problem?. I have changed the plugs, cleaned the carb, increased the fuel octane, and a added a new battery.
 

dvchristoff

Cadet
Joined
Aug 2, 2003
Messages
27
Re: help merc 65hp 1973 stalls on full power.

According to the manual a lean idle mixture will cause power loss during acceleration. You might want to get a manual, it will show you where the screws are and how to set them.
 

paramedic416

Recruit
Joined
Aug 22, 2003
Messages
2
Re: help merc 65hp 1973 stalls on full power.

Sounds good. Do you happen to know how many screws there should be to adjust. I will check with my local marine to find a manual. The motor is old I might have trouble finding a manual.
 

The Marine Doctor

Commander
Joined
Jul 25, 2003
Messages
2,177
Re: help merc 65hp 1973 stalls on full power.

2 screws<br />1 on each carb.<br /><br />Top right side when looking at the engine from the front. They should be inset into the carb. You will need a long narrow screwdriver.<br /><br />Set them at 1 1/2 turns.<br /><br />TMD
 
Top