help with model number please

[coolbri70]

i bought this motor and it runs good no problem, the po told me it was a 94 model short shaft 9.9 upgraded to 15hp and electric start, i wanted to look at some parts diagrams to get familiar with my motor, there seems to be some gap in the parts lists, did i get some odd year? i went down to get the model number off the motor and the sticker had been torn off, maybe this stamp will help hope someone can shed some light, parts seem to be listed till 93 and then from 95. why no 94 the number is G357435

 

[coolbri70]

Re: help with model number please

after a little research i see that 94 was the last year of the 2 stroke? why do parts lists run to 93? i read of a similar motor it was a E10RERB could that be it?

 

[coolbri70]

Re: help with model number please

? Model E10EERB
? Model E10ELERB
? Model E10RELERB
? Model E10RERB
? Model E10RLERB
? Model E10SELERB
? Model J10EERB
? Model J10ELERB
? Model J10RELERB
? Model J10RERB

? Model J10RLERB
? Model J10SELERB
got to be one of these but which one

 

[mark1961]

Re: help with model number please

Hint.....your motor has both rope and electric start so the model number will have "RE" designation......that should narrow your list down a little.

 

[coolbri70]

Re: help with model number please

Hint.....your motor has both rope and electric start so the model number will have "RE" designation......that should narrow your list down a little.

the motor began life pull start the electric was added i was told

 

[mark1961]

Re: help with model number please

the motor began life pull start the electric was added i was told

I see......then do the reverse of what i stated previously......if the motor is a longshaft, eliminate anything on your list that has "RE" before "L"and anything that does not have "R" after "10".

 

[mark1961]

Re: help with model number please

So what are we left with?

E10RERB or E10RLERB......depending on the shaft length of the motor.

 

[coolbri70]

Re: help with model number please

So what are we left with?

E10RERB or E10RLERB......depending on the shaft length of the motor.

thanks, it's a short shaft so must be the E10RERB, is there a sereal number elsewhere on the motor?

 

[mark1961]

Re: help with model number please

thanks, it's a short shaft so must be the E10RERB, is there a sereal number elsewhere on the motor?

Not that im aware of.....

 

[coolbri70]

Re: help with model number please

just wondering so i could write it down in case of theft, maybe i can engrave it with something.

 

[coolbri70]

Re: help with model number please

ok, i was worried that the tag was gone and i had no serial number, then after some searching i read that it's stamped in the core plug of the engine block. so i guess thats my number in post #1