Inboard motor won't start

kadydid

Recruit
Joined
Jun 22, 2004
Messages
2
I have a 95 Basstracker with an inboard motor that will turn over but it is not getting any fire. Checked fuses Ok. I'm getting gas. I am not getting any spark to the spark plugs. Please help.<br /><br />Thanks
 

Skipster1

Petty Officer 2nd Class
Joined
Apr 24, 2004
Messages
173
Re: Inboard motor won't start

It would help if you specified the year and make and type of engine you are talking about.<br />Also, was it running good and just quit? When did it decide not to start? What maintenance or other work have you done recently?<br />Did you check all the spark plug wire connections to the plugs and distributor? Did you check the wire from the coil to the distributor?? Did you check to make sure the coil is outputting current? Did you check points, condensor, etc????
 

cuzner

Senior Chief Petty Officer
Joined
Feb 14, 2004
Messages
771
Re: Inboard motor won't start

Check your cut out switch,make sure its in the run position,if you have done any work around your wiring make sure did,nt damage any of the wires.<br /><br /><br /> Jim
 

hoot

Chief Petty Officer
Joined
Sep 8, 2002
Messages
434
Re: Inboard motor won't start

check volts to + side of ignition coil with key on and in start position. check kill switch.
 
Top