Installing Ignition switch!

[Central Bears]

I posted in the Suzuki forum without response,Let me make this simple.Trying to install ignition,and trim switch to center console.They are coming off the suzuki throttle box that came with the motor.Any advice would ge great,Thanks Flex.

 

[Silvertip]

Re: Installing Ignition switch!

Mount them on the console and extend the wires from the control box to the console. Mark the wires before you disconnect them. If you have already disconnected them you will need a schematic to get them back on the proper terminals. Remember, you also have a neutral start switch in the box so don't eliminate or wire around it as you will almost certainly pitch someone overboard when you accidentally start the engine in gear.

 

[Central Bears]

Re: Installing Ignition switch!

Thanks for the info.after this tropical storm leaves sunny FLA.I'll give it a shot,Flex.

 

[littlebookworm]

Re: Installing Ignition switch!

Just wanted to wish you good luck with the wiring and with getting through Fay. From what I've been hearing, you guys are getting pounded. My brothers are in Boyton Beach and Del Ray; so far they're wet but OK. Hy

 

[Central Bears]

Re: Installing Ignition switch!

Thanks,with all the rain,I feel like i'm back in the click humping thru rice patties,Flex.