peaceman56
Recruit
- Joined
- Jun 30, 2020
- Messages
- 2
I bought a used Johnson 5hp that supposedly had less than 10 hours on the motor and it looks like it. Using fuel from the internal tank (new fuel 50:1) the motor took many (~20-30) pulls to start. Water from the tell tale was trickling out, not a good solid stream so will likely need a water pump. Once started, motor ran fine.
The next time, same story with many pulls but this time it back fired blowing the shift linkage rubber cover off the exhaust. Spark plug looks okay, light brown tip color, and is sparking when the cord is pulled.
Any thoughts on what else to diagnose or what could be causing this? Thanks for any thoughts or guidance.
The next time, same story with many pulls but this time it back fired blowing the shift linkage rubber cover off the exhaust. Spark plug looks okay, light brown tip color, and is sparking when the cord is pulled.
Any thoughts on what else to diagnose or what could be causing this? Thanks for any thoughts or guidance.