Johnson 93 v4 90 hp winterizing

[maxgun]

Hi Can someone please explain how, or where I install the fogging liquid into this engine. Also the decarb. I see a valve with a red cap that turns, on a thing that looks like a tire valve, is that it? Thanks Ron

 

[jall65]

Re: Johnson 93 v4 90 hp winterizing

I got this off the Sea foam web site and it explains it here..
http://www.seafoamsales.com/deepCreepTech.htm

DEEP CREEP Engine Fogging

For storage, the engine should be thoroughly saturated internally with DEEP CREEP. Spray through carburetor, throttle body or vacuum line and into the spark plug holes. Use Schraeder Valve hose attachment if needed for outboards.

 

[maxgun]

Re: Johnson 93 v4 90 hp winterizing

Thanks for the response, but my problem is that I don't have a carborator. It is fuel injected.

 

[jall65]

Re: Johnson 93 v4 90 hp winterizing

OHHHH LOL sorry:$ But you can still put in the injectors through the vaccum lines. and in the spark plug holes...

 

[o/b tech]

Re: Johnson 93 v4 90 hp winterizing

Your motor should have carbs but is oil injected thru the vro. There is is also a primer solenoid mounted on top of the backside of the air box cover. It has a red cap on it that can be threaded off. The can of storage seal has a fitting on it, from Bombardier, that can be threaded onto the primer solenoid. Give the trigger a squeeze, while the engine is running, and this will distribute the oil thru the motor. You will have to throttle the motor up a bit while doing this as it will try to stall as the motor is fogged. Keep adding the oil until you get heavy blue smoke coming out of the exhaust. This should also kill any mosqitos in the area as well.

Hope the info helps.

 

[jtexas]

Re: Johnson 93 v4 90 hp winterizing

the tire valve you described is called a schrader valve...it's the one mentioned in the Deep Creep quote from jall65

 

[maxgun]

Re: Johnson 93 v4 90 hp winterizing

So I need a shraeder valve hose attachment . From a boat store?. Thanks for everyones help. Ron