GOOD NEWS. . . . The PICTURE UPLOAD FUNCTION IS WORKING !!! The tech folks at the parent company have been able to remedy the issue. You can upload pictures once again. Thank you for your patience.
i have a 1990 johnson 15 hp. iput on a new prop how tight the nut has to be. the old was just finger tight. in a manul it say 120 pounds. how can you do that when the motors is in neural.
You need to place a block of wood between the prop and the outboard's lower unit to stop the prop from spinning. Once the wood is placed to stop the prop from spinning you will be able to tighten it to the proper specs. Be careful and make sure the wood doesn't slip out while you're trying to torque the nut.
