Ok, here's the deal, I just "acquired" a 25hp Johnson Sea Horse, don't know what year, yet. I ran it and it had good water flow from the "**** tube" at idle and low rpm, but when it was opened up the flow decreased significantlly. At one point, at full throttle, I saw vapor coming from the tube, but only a drip of water, once in a while. I idled back to the ramp as soon as I saw that, just to get back on the trailer. Is it normal for the water flow to decrease at higher throttle or is something wrong. Question 2: When under throttle the engine "jumps" like it is jumping in an out of gear. It has a remote throttle and gear selector at the console of the boat. I was wondering if there is any way to adjust the linkages, or is there something more serious wrong.