We are looking to purchase 20 or so of the following specified propellers:
materials: aluminum and/or steel
diameter: 24"
pitch: not sure
bore: the hole seems to be .5 to .625" in width, the center part in total is 2.5" diameter
the depth of the blade is 3.625"
We do not need these exact specs, except they must be metal, since they are freestanding and will not be fitted to any motor. They can be used, or in varying condition, as we would refinish the blades.
I have attached a photo for reference. We are located in Brooklyn NY but can travel locally (100 mi) for a confirmed order.
Thanks for any assistance in locating these older/used metal props.
materials: aluminum and/or steel
diameter: 24"
pitch: not sure
bore: the hole seems to be .5 to .625" in width, the center part in total is 2.5" diameter
the depth of the blade is 3.625"
We do not need these exact specs, except they must be metal, since they are freestanding and will not be fitted to any motor. They can be used, or in varying condition, as we would refinish the blades.
I have attached a photo for reference. We are located in Brooklyn NY but can travel locally (100 mi) for a confirmed order.
Thanks for any assistance in locating these older/used metal props.