Lost power on return to ramp screws missing from transfer port caps. 94 force 120

[wildvortex]

Not perfect but pretty close. Definitely good enough to seal everything. Just holes were off a little.
Back running as good as ever. Thanks for all your help!

 

[flashback]

That's a fine job, gasket made easy, I generally do it with a ball pean hammer and an exacto knife..LOL.

 

[wildvortex]

That's a fine job, gasket made easy, I generally do it with a ball pean hammer and an exacto knife..LOL.

Not so sure how the marking would go on this for doing it that way.

I scanned the outside of the cover and pulled into CAD. Drew the outline then used a measured offset to get the ID. Took me all of 15 minutes on the computer.