Lowe sea nymph

[dgrasser]

Re: Lowe sea nymph

Hey,is your Yamaha 40 HP a two or three cylinder. A dealer told me that the three cylinder is the way to go if you're going to do alot of trolling...much smoother.

 

[bbtruck01]

Re: Lowe sea nymph

the 40hp I have is a 3 cyld. It dose run smooth at low speeds. Ionly have about 12hr on it , but I can't do anything but say it's a good motor. She runs well at any throtle.It'll be doing alot of trolling speed when stripper season comes in so I'll let you know more as I use it more.I can't say anything bad about the motor or boat

 

[MFG197]

Re: Lowe sea nymph

my mistake, Lowe and Sylvan are not the same line. it's smoker craft and sylvan that come off the same line.

 

[JeffV]

Re: Lowe sea nymph

We just bought a 1991 Sea Nymph Fish and Ski that seems to be a good boat. We are looking for a bimi top with snaps down the side also. Anyone have suggestions on where to look?

 

[SpinnerBait_Nut]

Re: Lowe sea nymph

Jeffv, welcome to iboats.<br />Might want to look here, http://www.iboats.com/mall/biminifinder/?action=models&manufacturer=Sea_Nymph, for your bimini top.<br />Again, welcome to iboats.

 

[catman59]

Re: Lowe sea nymph

I have a 1999 lowes sea nymph that has holes being eaten in the transom,is this what you are calling galvanic corrosion. I'm the second owner and i have only had it in fresh water. Do you know if there is a way to stop this? If i don't get it stopped pretty fast my boat won't be usable.

 

[Deeppowder]

Re: Lowe sea nymph

I was also taking on water when the boat was first put in the water. When they attached the hoses for the livewell onto the adapters that go threw the transom. The o-rings were broken. I removed what they had and gear clamped the hoses on. No problems now. Enjoy your boat.