main jet size 90 Evin 150XP

[bassnmamma]

My Model # is VE150SLESB<br />Serial # R 08549080<br />Anyone know what factory sizes are on three mains jets? Are they all the same? I've had so much carb work done is last 12 years I'm not sure what the original sizes were.<br />Also, what is the min-max rpm range, and max rpm at WOT? Thanks

 

[walleyehed]

Re: main jet size 90 Evin 150XP

My OMC books don't show me the factory size, just the available sizes, and I don't have the fich for P/N's on that eng.<br /> Did you get my response on the other post about Best Marine in Denver???-303-423-3311.<br />Great people!

 

[bassnmamma]

Re: main jet size 90 Evin 150XP

Yup, I did. Yup, I will call them. BTW, is Jim's Prop Shop in Denver trustworthy? Gotta re-prop too. At least I caught a nice bass tonight from shore with my daughter.... Kinda helped me remember why I'm going through all this trouble anyways!

 

[walleyehed]

Re: main jet size 90 Evin 150XP

Jim's in Denver is a family friend and yes, our choice for prop work.<br />Jim McCune is the owner/operator...tell him Hi from Kenny and Jack in Goodland.<br /> About the smallies........caught 17 last night working jointed #4 'Raps on face of Dam from boat, Right at sun-down.<br />I'm 175mi. straight east of you....send me your email, and I'll fill ya in on some fantastic Bass (all 3 spieces!)fishing.<br />

 

[clanton]

Re: main jet size 90 Evin 150XP

The OMC bulletin you are looking for is 2217. If I ever get my computer running again, I will post the jet size, and if your dealer does not have the bulletins, look for different dealer.

 

[OBJ]

Re: main jet size 90 Evin 150XP

Bassn....heres a run down on yer jets.<br /><br />High Speed jet is a 65C PN322810<br />Intermediate jet is a N030 PN333312<br />Idle Air Bleed jet is a No38 PN323149.<br /><br />Jim

 

[bassnmamma]

Re: main jet size 90 Evin 150XP

Thanks all, you guys are amazing! May the fishing gods bless you with many lunkers.

 

[clanton]

Re: main jet size 90 Evin 150XP

Depemds on ypur carbuator number, your engine should have carb number 431795. Jets size for this carb up to 3000 feet is Low speed 35M, intermediate 30C, high speed 65C. Up to 3/6000 feet, low speed 33M, intermediate 36C, high speed 61C. If you have carb 431795 or 432118 jetting is different.