rambler289
Recruit
- Joined
- Jul 28, 2009
- Messages
- 5
Yester day I was out in my SeaRay 1986 18ft boat and was pulling a tube. The engine was running fine I did a couple high speed runs and then was pulling tubers for an hour or two. Then I was having problems with cruising at high speed. I would stop let it idle and open the hatch. I look around and didn't see anything wrong or smell anything. Then for a few minutes it would be okay and I could get it up to a little under 4,000 rpm. Then it just kept getting worse so I pulled it out of the water. Hole shots were fine until I got up to crusing speed. It has fresh gas and ran fine for the week before.
Any ideas would be helpful. I was thinking that it isn't getting enough fuel at high revs. But I am not a boat mechanic, would it have a fuel filter? It is carbureted btw.
Any ideas would be helpful. I was thinking that it isn't getting enough fuel at high revs. But I am not a boat mechanic, would it have a fuel filter? It is carbureted btw.