GOOD NEWS. . . . The PICTURE UPLOAD FUNCTION IS WORKING !!! The tech folks at the parent company have been able to remedy the issue. You can upload pictures once again. Thank you for your patience.
I have a 2000 Johnson 115. When throttled to about 3500 rpm, the motor will rev on its own to max,
Throttle also feels a little sticky, not sure if contributing.
thanks in advance !
Racerone, thanks for reply,
yes. In neutral water supply connected was running motor putting sea foam through it. I gave it a little throttle and it took of on its own.
The motor has not run in two years and I finally got it going. Ran fine with no additional throttle. I wanted to be sure that the motor would at least do above 1000 RPM so when I did lightly push forward once it hit 3000 it continued revving higher until I completely pulled back.
Started with the throttle cable as may be a possible issue but aside from being a little sticky, seems fine.
I guess at this point I’m wondering if it’s some type of carb issue. Ty.
