Re: motor start but stall when i give it gas.
this is crazy this motor was runing good for 2 months now .I took it out last week and road it around for 1hr and then parked and did some swimming, got back in the boat and had this problem.the pluges are about 2 month old.
I missed this part somehow. Since it
was running just fine, it could have jumped a tooth on the timing belt. That would throw everything out of whack and let it idle ok but die with any throttle.
You would have to align the crank pulley with the mark on the block and then look at the cam pulley to see if it is aligned with its mark as well. The intermediate shaft doesn't actually matter, but you can check it too. .
If the pulleys are all aligned correctly, then check ignition timing (using a timing light) and adjust the carb.
Timing is supposed to be at 10degrees BTDC when at 750 rpm, a little lower than normal idle of 900rpm. Then you check it at 4200 rpm and it should read 36degrees IIRC, you should double check the numbers in the manual, I'm just going off of memory.
Once the timing is set, adjust the idle to 900. Adjust the accel pump to be fast and responsive. And adjust the mixture screw so it doesn't die when you punch it.