motor will not idle

angler0520

Petty Officer 3rd Class
Joined
Jun 24, 2009
Messages
76
i have a 1996 15 hp evinrude the motor ran like crap when i got it and it was geting water in the bottom cylinder i replaced the base gasket and ruber gromets on exhaust and water coper tubes i have no more water in the cylinder but the mottor still runs like junk and will not idle i have checked everything spark comp. checked the reeds rebuilt the carb!!!!! what do i doo next??????
 

mikesea

Lieutenant Commander
Joined
Oct 1, 2006
Messages
1,830
Re: motor will not idle

did you totally soak the carb,are you sure the passages whithin it arent plugged,are you sure you have all the right carb parts,there were many different setups on those engines over the yrs.that said,the throttle roller rides on a cam under the flywheel,sometimes they break and the roller dont ride correctly,be certain nothing has broken off that cam and the roller is in time with the advancement of the timer which is what rotates under the flywheel,it should rotate freely,they stick sometimes
 
Top