mounting a few things

[icyveins]

Hey Guys and Gals,

Trying to figure out through out my build where to mount my ducer for my finder/sonar/nav
also a place to put my pickup screen and feed line for my wash down/live well/bait tank pickup.
unfortunately I don't have a bracket that's welded on one of the toons for ducer.......
I have been racking my brain to figure out a way without having one welded on....
Thanks for the help and ideas

 

[MH Hawker]

Re: mounting a few things

Not many choices, the transom can be used but due to the turbulence it has to be mounted in the front of the pod and deep, or you can make a bracket to go on the back of the tube.

 

[old jim]

Re: mounting a few things

The Eagle I just removed from my toon the previous owner had the ducer attached to the transom pod. Well
ahead of the motor, and it worked well most of the time. However this season while puttin around in shallow
places I beleive I got into the weeds a time or two. Things got a little wierd but eventually cleared up. The
new Garmin has the ducer on the bracket that holds the pump for the well. old jim

 

[icyveins]

Re: mounting a few things

Thanks guys, I am going to take a better look later this week. I have a lot of things to mount to the bracket so I am wondering if it would be worth my efforts to have a box bracket welded right to the lowest point on the toon. I will be posting pics of the build as we get alittle further ahead. as for right now in the build we have striped it down powerwashed everything and put new decking down. just waiting on flooring to arrive and install then I can start putting fencing/console back together.