Re: Need Fuse panel diagram 92 3.0 alpha 1
If you are talking about a fuse panel located at the helm, that is "Boat" electrical system diagram you are looking for, not an "Engine" diagram. +12 volts goes into one end of all fuses. Current then passes through each individual fuse to whatever circuit that fuse protects. So if there is no wire on connected to an empty fuse slot, no fuse is needed. If there is, then determine what that circuit is for and fuse it accordingly. Most circuits on a boat like yours can live nicely with a 7.5 or 10 amp fuse. Use the search feature for typical boat wiring diagrams. This wiring is very generic. The feed from the battery to the fuse panel at the helm should be #10 or #8 gauge. 10 gauge would likely be more than adequate for existing loads.
