Re: need help with lill o'le motor "novice"
You may have missed some debris in the carb, in a port,or jet.<br />Also, when u replaced the carb,did you use the same mounting gasket?<br />If so, you can easily make a new one from gasket material (available at all auto parts stores), and a razor knife, using the old gasket as a pattern. Also,note this gasket has a small hole in it.Make sure this is over the port in the flange and carb.The gasket can be installed backwards, thus blocking this port.<br /><br />It might be a good idea to check the compression, fuel pump, and tank vent too.<br />Good luck