need to find wiring diagrams for entire instrument cluster

kc5vjl

Recruit
Joined
Jul 16, 2014
Messages
2
I am relatively new to the boating world and still a little "green" on things. But here is my delima: I recently acquired an 84 champion bass boat with a Johnson 235 outboard. My problem is that before I acquired it, some hoodlems had gone and sliced up every bit of the wiring on it. I had found the diagrams for re-wiring the main harness to the motor from the control box. Now, I need to find the right diagrams for the tilt and trim, and all the wiring that goes from the switches to the gauges to the back, that goes to the aerator and recirculation pump, bilge pump, etc. Anybody able to help me find them or tell me where to look?
 

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
43,329
I am relatively new to the boating world and still a little "green" on things. But here is my delima: I recently acquired an 84 champion bass boat with a Johnson 235 outboard. My problem is that before I acquired it, some hoodlems had gone and sliced up every bit of the wiring on it. I had found the diagrams for re-wiring the main harness to the motor from the control box. Now, I need to find the right diagrams for the tilt and trim, and all the wiring that goes from the switches to the gauges to the back, that goes to the aerator and recirculation pump, bilge pump, etc. Anybody able to help me find them or tell me where to look?

Have not been able to find your setup but here is one for Mercruiser. It can at least give you some ideas of how it might have been done.

http://www.boatfix.com/merc/servmanl/13/13e4r2.pdf
 

kc5vjl

Recruit
Joined
Jul 16, 2014
Messages
2
Thank you for the information AllDodge, anything is a help. I cannot open the file from my phone, but will try again on my laptop. I'm sure it will be helpful.
 
Top