need to replace noise barrier material-force engine

Copake1

Recruit
Joined
Apr 25, 2002
Messages
1
I have an 85hp force engine and the noise barrier material in the cover on top has to be replaced. Any suggestions of where to purchase it, or what to use in its place?<br />copake1
 

12Footer

Fleet Admiral
Joined
Mar 25, 2001
Messages
8,217
Re: need to replace noise barrier material-force engine

You could use the foam rubber stuff that is used in shipping (very close to original), or you could upgrade to the silver mylar stuff that is sold at West Marine and other boating stores.<br />3M weatherstrip adhesive can be used to glue it in,but make sure it is spotless clean first.
 
Top