Neutral switch needed for OMC control

[daleatskiworldorlando]

Hi all, I need to try and find a replacement neutral switch for an old (about 1988) single lever throttle/shift control. The engine is a Evinrude 120 and the control has the igntion and kill switch built in. There is also a warm up lever and the control is almost a rectangle with a slop on one side only. That is the best I can describe it with out a picture. I can provide a picture if needed.<br /><br />Anybody know if parts are still available?<br /><br />Or a source to ID the control better would help.<br /><br />Thanks, Dale

 

[Vantoo]

Re: Neutral switch needed for OMC control

Try Evinrude.com then click on parts and then try the engine diagrams..... might find it there...

 

[MCM]

Re: Neutral switch needed for OMC control

Welcome to the forum Dale,<br /><br />Go to iShopmarine.com, click on OB Accessories towards the bottom of the page. They have several listed for that years as well as other years. They will also have diagrams & parts list as well.

 

[daleatskiworldorlando]

Re: Neutral switch needed for OMC control

Hi MCM and the group. Thanks for the great link. That is one nice resource. I found the parts no problem.<br /><br />I also tried the Evinrude.com link but with the dial up access I have here at work it was too slow to page through all the pages to try and find if they have anything on the control. The navigation on that site needs work, you have to wonder about some web masters.<br /><br />Thanks again, Dale