New cdi and still no spark 1972 chrysler 85hp

Davidsjr

Cadet
Joined
Oct 9, 2015
Messages
10
Bought a new cdi for my boat thinking that it was bad. I have bought new spark plugs and still no spark. Maybe the wrong cdi module? This is the one i purchased. And for some reason it didnt come with coil wire as shown
 

Attachments

  • photo237836.png
    photo237836.png
    1.6 MB · Views: 0

Nordin

Commander
Joined
Jun 12, 2010
Messages
2,641
Check the points gap, Clean and reset the poitns to 014 in.
The 1972 85Hp should be equipped with a points distributer but it could be replaced with a electronic one with preamp.

You can check for spark by setting the #1 (top) cyl. in TDC. Throttle at idle and then the curve at the disterbuter pully should line up with the flywheel rim.
Loose the white/black wire at distributer, turn on the ignition and strike the wire to ground. Each time you strike it the #1 sparkplug should spark.
 
Top