New guy Intro and Tilt wiring headache

OldrustBucket

Recruit
Joined
Apr 23, 2020
Messages
0
Hi guys newbie here. I have a 95 Johnson J50TL ( SPL ) that I am getting in shape. It runs great and but I am having issues on the tilt trim wiring. I have tried searching and there is alot of info out there but nothing specific to my need. I am trying to replace the tilt trim wire harness but noone seems to make them. I got one for a 1999 but the plugs do not match and the wiring is a much smaller gauge. Does anyone have any ideas on a good resource for a fix for this? It appears that I need to replace the wires and the relay setup as one deal as the relays sockets are hard wired. The control is an OMC with 5 wires if that helps also.

Thanks in advance, I am sure I will have other questions as I renew this engine. I love these older 2 strokes quite a bit


Rick
 

tblshur

Senior Chief Petty Officer
Joined
Aug 24, 2011
Messages
688
:welcome: ORB i came up with 2 part # for you to check out i dont know if it what u need . 175202 and 583956 hope this helps :smile-new:
 
Top